Difference between revisions of "Remote Sensing of Honey Bees"

From Living Building Science

 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=== Introduction ===
+
== Abstract ==
Drones are essential for the longevity of a beehive as their sole purpose is to mate with the queen to produce worker bees. Although, they play an integral part in the beehive, they are not very well understood and research on their flying patterns is scarce; “Available information on drone activity is based mainly on direct observations during a limited period of time and for a restricted time of the day” (Reyes, 2019).
+
During winter, bees sometimes starve to death due to insufficient supply of honey or from the phenological mismatches between when the bees emerge & the availability of floral resources. To counter this issue, urban beekeepers provide their bees with sugar substitutes, but these substitutes lack the necessary enzymes & nutrients found in their natural food supply. We explored possible solutions to maximize foraging behaviors & ultimately increase the natural food supply of urban honeybees, which can potentially increase pollination & the viability of surrounding biodiversity.  
[[File:Capped drone frame.jpg|thumb|center]]
 
  
=== About the Team ===
+
Due to limited time & resources, our experiment will begin in Spring 2022. Since we only have access to one incubator, we plan to set the incubation temperature at 32.5°C. We also plan on recording the age, duration of incubation, & movement in & out of the hive using the RFID system. To monitor the hive temperature, we will be using BroodMinder to log & store live hive temperature & humidity data via Bluetooth.
The RFID team is responsible for implementing the radio frequency identification system (RFID) to track and record bee flight patterns in and out of their hive. During the Fall 2020 semester, the team tagged 15 bees in total and built a water-proof wooden box to hold the RFID system. The bees were first collected by using an Aspirator and then subduing the bees in the freezer for a few minutes. Once the bees were semi-paralyzed, the tags were attached to the thorax of the bee using Krazy glue and the bees were then set free. A sensor was placed at the entrance of the hive to identify and record the time a tagged bee entered or exited the hive.
 
Our goals for the Spring 2021 semester was to use the RFID system that was set up last semester in order to track drone flight patterns. Important factors of the flight patterns that we want to consider are the average duration outside of the hive, the average number of flight trips, and general drone activity throughout the day. The average duration the drones spend out of the hive will be taken with respect to their age, and the average number of flight trips will be taken with respect to the temperature each day.
 
  
=== Photos ===
+
== Remote Sensing of Honey Bees ==
[[File:Waterproof Box.jpg|frame|center|The waterproof box containing the RFID equipment.]]
 
  
  
[[File:Rfidequipment.jpg|frame|center|The RFID equipment inside the waterproof box.]]
+
=== Introduction to the System of Study ===
 +
There are currently over 500 species of bees found in Georgia. One of the most abundant is the Apis mellifera, commonly known as the western or European honey bee (Schlueter, 2020). Like other Hymenopterans, their unfertilized eggs develop into males & their fertilized eggs develop into females. The female larvae that are fed pollen, nectar, & brood become workers. Worker bees are non-reproductive female bees that make up a majority of a hive. As their name suggests, workers specialize in a variety of tasks including, but not limited to, tending to the queen, nursing young, & foraging. Foragers specialize in traveling to floral sites & returning to the hive with nectar & pollen (Dargahi & Todd, 2020). An experiment conducted in 2016 found a correlation between incubation temperatures of brood and adult behaviors and specialization within the hive. They found that adult bees that were incubated at 35°C and 36°C  performed better in terms of behavior, learning, and memory compared to those raised at 32°C. They also noted that foragers incubated at  32°C would begin foraging at 2 weeks, similar to those incubated at 35°C and 36°C. However, they noticed that more bees in the 32°C group would leave the hive at normal foraging times but would not return to the hive (Wang, Xu, Zhu, Chen, S. Zhou, Huang, & B. Zhou, 2016).
  
 +
=== Methodology ===
 +
==== RFID Tags ====
 +
RFID tags are a type of tracking system that uses smart barcodes in order to identify items. RFID stands for “radio frequency identification,” and as such, RFID tags utilize radio frequency technology. These radio waves transmit data from the tag to a reader, which then transmits the information to an RFID computer program. RFID tags are frequently used for merchandise, but they can also be used to track vehicles, pets, etc.
  
[[File:EmmaBee.jpg|frame|center|Emma with a bee on her finger!]]
 
  
 +
==== Type of Bee ====
 +
The type of bees that we worked with is called worker bees which are non-reproductive female bees that make up a majority of a hive. As their name suggests, workers specialize in a variety of tasks including, but not limited to, tending to the queen, nursing young, & foraging (Dargahi & Todd, 2020).
  
[[File:RFIDsensor.jpg|frame|center|The RFID gate/sensor at the entrance of the beehive.]]
 
  
 +
==== Tagging Methods ====
 +
A small amount of store-bought super glue is applied to the RFID sensor and, while holding the bee lightly with a pair of forceps at the upper abdomen (holding down the wings), the RFID tag is placed between the wings at the top of the thorax. The bee is released after a few seconds. In some cases, bees are collected and held manually during the RFID fitting or several bees are brought to the laboratory where placing the bees in the freezer for a short amount of time can be used to decrease bee movement as the bees fall asleep. It will be ideal to tag bees as they hatch in their first day of life as an adult due to their inability to fly. Tagged bees were then placed in hive in Kendeda Building.
  
[[File:Taggedbees.jpg|frame|center|Bees with the tags attached.]]
+
=== Prospective Results ===
 +
[[File:Screenshot 2021-12-07 at 18-38-47 VIP RFID Final Poster Fall 2021.png|center|Figure 1. Internal Hive Temperature vs. Incubation Temperatures over Time]]
 +
<br>
 +
We tracked 442 temperature points over 19 days, taken from the mid-upper hive where winter clustering occurs. While widely variable, the average internal hive temperature was 25.7°C, which is highly unfavorable for successful incubation.
 +
<br>
 +
<br>
 +
[[File:Screenshot 2021-12-07 at 18-38-58 VIP RFID Final Poster Fall 2021.png|Figure 2. Time in Incubator vs Average Age of Successfully Leaving the Hive]]
 +
<br>
 +
This indicates proceeding with incubating at elevated temperatures, even at a “low” 32.5°C, should be beneficial for the hives of Kendeda.
 +
<br>
 +
<br>
 +
[[File:Screenshot 2021-12-07 at 18-39-06 VIP RFID Final Poster Fall 2021.png|Figure 3. Percentage of Workers Incubated at 32.5*C,  34.5*C, & 36*C with Successful Flight Returns]]
 +
<br>
 +
As this study expands to gather data on remaining incubation temperatures, we should see an increase of successful flight returns, while still taking into account typical climate events in Atlanta, Georgia & predation. This again would be accredited to better self-control of bees incubated at higher temperatures (3, 6).
  
 +
=== Conclusion ===
 +
While we were unable to begin the true experiment this semester due to seasonal changes & resource availability, we proposed a robust experimental design plan that can be used for at least the next two to six semesters. Based on prior literature, it increasing the incubation temperature of honeybees results in more engaged & efficient flight behavior while minimizing mortality rates (2, 5, 6). Thus, we expect to see successful first flights occurring at younger ages for those incubated for longer periods across the board for 32.5°C, 34.5°C, & 36°C. With this, we would also anticipate seeing fewer losses of bees after they leave the hive for their flights, with the least amount of loss among incubations of 36°C.
  
[[File:Aspirator.jpg|frame|center|Using the Aspirator to collect the bees for tagging.]]
+
Limitations of this include only having one incubator, which prolongs this experiment’s time. Additionally, we do not have the resources to distinguish orientation flights or subsequent orientation flights from foraging flights; thus, we only focus on first flights.
  
 +
=== Photos ===
 +
'''Please view our semester photo gallery [https://gt-rfidbees.carrd.co/ here]!'''
  
[[File:RoofofKendeda.png|frame|center|A view of the roof of the Kendeda Building.]]
+
== Team Members ==
 
 
  
[[File:Hivesonkendeda.jpg|frame|center|Hives located on the roof of the Kendeda Building.]]
+
{| class="wikitable"
 +
|-
 +
! Name !! Major
 +
|-
 +
| Zoë Altizer || Biology
 +
|-
 +
| Zoe Kim || Biology
 +
|-
 +
| Sarah Talwar || Neuroscience
 +
|}

Latest revision as of 19:47, 7 December 2021

Abstract

During winter, bees sometimes starve to death due to insufficient supply of honey or from the phenological mismatches between when the bees emerge & the availability of floral resources. To counter this issue, urban beekeepers provide their bees with sugar substitutes, but these substitutes lack the necessary enzymes & nutrients found in their natural food supply. We explored possible solutions to maximize foraging behaviors & ultimately increase the natural food supply of urban honeybees, which can potentially increase pollination & the viability of surrounding biodiversity.

Due to limited time & resources, our experiment will begin in Spring 2022. Since we only have access to one incubator, we plan to set the incubation temperature at 32.5°C. We also plan on recording the age, duration of incubation, & movement in & out of the hive using the RFID system. To monitor the hive temperature, we will be using BroodMinder to log & store live hive temperature & humidity data via Bluetooth.

Remote Sensing of Honey Bees

Introduction to the System of Study

There are currently over 500 species of bees found in Georgia. One of the most abundant is the Apis mellifera, commonly known as the western or European honey bee (Schlueter, 2020). Like other Hymenopterans, their unfertilized eggs develop into males & their fertilized eggs develop into females. The female larvae that are fed pollen, nectar, & brood become workers. Worker bees are non-reproductive female bees that make up a majority of a hive. As their name suggests, workers specialize in a variety of tasks including, but not limited to, tending to the queen, nursing young, & foraging. Foragers specialize in traveling to floral sites & returning to the hive with nectar & pollen (Dargahi & Todd, 2020). An experiment conducted in 2016 found a correlation between incubation temperatures of brood and adult behaviors and specialization within the hive. They found that adult bees that were incubated at 35°C and 36°C performed better in terms of behavior, learning, and memory compared to those raised at 32°C. They also noted that foragers incubated at 32°C would begin foraging at 2 weeks, similar to those incubated at 35°C and 36°C. However, they noticed that more bees in the 32°C group would leave the hive at normal foraging times but would not return to the hive (Wang, Xu, Zhu, Chen, S. Zhou, Huang, & B. Zhou, 2016).

Methodology

RFID Tags

RFID tags are a type of tracking system that uses smart barcodes in order to identify items. RFID stands for “radio frequency identification,” and as such, RFID tags utilize radio frequency technology. These radio waves transmit data from the tag to a reader, which then transmits the information to an RFID computer program. RFID tags are frequently used for merchandise, but they can also be used to track vehicles, pets, etc.


Type of Bee

The type of bees that we worked with is called worker bees which are non-reproductive female bees that make up a majority of a hive. As their name suggests, workers specialize in a variety of tasks including, but not limited to, tending to the queen, nursing young, & foraging (Dargahi & Todd, 2020).


Tagging Methods

A small amount of store-bought super glue is applied to the RFID sensor and, while holding the bee lightly with a pair of forceps at the upper abdomen (holding down the wings), the RFID tag is placed between the wings at the top of the thorax. The bee is released after a few seconds. In some cases, bees are collected and held manually during the RFID fitting or several bees are brought to the laboratory where placing the bees in the freezer for a short amount of time can be used to decrease bee movement as the bees fall asleep. It will be ideal to tag bees as they hatch in their first day of life as an adult due to their inability to fly. Tagged bees were then placed in hive in Kendeda Building.

Prospective Results

Figure 1. Internal Hive Temperature vs. Incubation Temperatures over Time


We tracked 442 temperature points over 19 days, taken from the mid-upper hive where winter clustering occurs. While widely variable, the average internal hive temperature was 25.7°C, which is highly unfavorable for successful incubation.

Figure 2. Time in Incubator vs Average Age of Successfully Leaving the Hive
This indicates proceeding with incubating at elevated temperatures, even at a “low” 32.5°C, should be beneficial for the hives of Kendeda.

Figure 3. Percentage of Workers Incubated at 32.5*C, 34.5*C, & 36*C with Successful Flight Returns
As this study expands to gather data on remaining incubation temperatures, we should see an increase of successful flight returns, while still taking into account typical climate events in Atlanta, Georgia & predation. This again would be accredited to better self-control of bees incubated at higher temperatures (3, 6).

Conclusion

While we were unable to begin the true experiment this semester due to seasonal changes & resource availability, we proposed a robust experimental design plan that can be used for at least the next two to six semesters. Based on prior literature, it increasing the incubation temperature of honeybees results in more engaged & efficient flight behavior while minimizing mortality rates (2, 5, 6). Thus, we expect to see successful first flights occurring at younger ages for those incubated for longer periods across the board for 32.5°C, 34.5°C, & 36°C. With this, we would also anticipate seeing fewer losses of bees after they leave the hive for their flights, with the least amount of loss among incubations of 36°C.

Limitations of this include only having one incubator, which prolongs this experiment’s time. Additionally, we do not have the resources to distinguish orientation flights or subsequent orientation flights from foraging flights; thus, we only focus on first flights.

Photos

Please view our semester photo gallery here!

Team Members

Name Major
Zoë Altizer Biology
Zoe Kim Biology
Sarah Talwar Neuroscience